Não existem pedidos de informação
Conventional wiring installation
Conventional wiring installation
The topic of conventional wiring installation covers the basic circuitry used for wiring in buildings. The wiring of lighting circuits, electrical sockets and electrical household appliances will form the basis for structured working. This then forms the basis for modern building management technology. The planning of wiring projects, selection of the correct electrical components and advice to end users are all covered in small wiring projects
Pesquisa de produtos
Description of the training panel system with photorealistic colour printing
The training panels consist of 5 mm thick panels of compressed laminated sheets coated on both sides with highly resistant melamine resin. The base colour of the panel is RAL7035 (light grey). Panel dimensions are standard DIN A4 in height (297mm). There are three different width variations available: 114 mm, 228 mm or 456 mm. To reduce the potential for injury, the front panel corners have rounded edges with a radius of 3 mm. The component symbols or circuit diagrams are screen printed in black in accordance with the latest DIN guidelines on the front panels, and where necessary enhanced with contrast-rich UV colour. When possible and expedient the front panel has been supplemented by colour graphics or photos. The UV colour print is also fade-resistant even when exposed to the sun’s rays. A special process using an additional protective lacquer coating protects the robust nature of the surface and makes it scratch resistant while it in no way compromising the front panel’s print transparency and clarity. The electrical connections are terminated at 4-mm safety sockets. The rear side is protected against physical contact with a removable cover.
For didactic reasons facilitating design and clarity the power supply bus is located at the upper and lower panel edges and features colours in accordance with DIN72551.
The training panels can be inserted into special experiment panel frames without having to use a tool. Alternatively, there is always the option of setting up any experiment panel with desktop case directly on the table or inside a carrying case.
